All MIBs › IB-SM-MIB › ibSmPortInfoInitType
ibSmPortInfoInitType
Module: IB-SM-MIB
OID (symbolic): IB-SM-MIB::ibSmPortInfoInitType
OID (numeric): 1.3.6.1.3.117.7.1.3.1.1.44
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Optional; shall be 0 if not implemented. Type of initialization requested by this port before SM moves it to Active or Armed state.
Bit 0: NoLoad. 0 = Port is requesting that its attributes be initialized. 1 = Port is requesting that no data be loaded into its attributes at all, asserting that the last-loaded data still exists and is valid.
Bit 1: PreserveContent. 0 = Port makes no request regarding content of the data that is loaded into its attributes. 1 = Port is requesting that all such data, if loaded, be set to the most recent content loaded by the SM.
Bit 2: PreservePresence. 0 = Port is requesting that all settable SA attributes referencing this port be removed prior to activating this port and Report()s of in/out of service (trap numbers 64/65) be sent. 1 = Port is requesting that all such data be preserved, and Report()s of in/out of service (trap numbers 64/65) not be sent for this port.
Bit 3: DoNotResuscitate. 0 = bits 0, 1, and 2 of this field are valid; initialization of this port should begin based on their values. 1 = bits 0, 1, and 2 are not valid; port is requesting that reinitialization of this port, and any Report()s of in/out of service (trap numbers 64/65) be delayed until this bit is set to 0.
Other Bits: Reserved.
What is ibSmPortInfoInitType?
A BITS value (noLoad, preserveContent, preservePresence, doNotResuscitate) describing the initialization the port asked for before the SM moves it to Active or Armed; 0 if not implemented. Mainly of interest to fabric engineers troubleshooting port bring-up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.117.7.1.3.1.1.44 snmpwalk -v2c -c public <target> IB-SM-MIB::ibSmPortInfoInitType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.117.7.1.3.1.1.44.1 snmpget -v2c -c public <target> IB-SM-MIB::ibSmPortInfoInitType.1
Start monitoring InfiniBand subnet manager node/switch (vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IB-SM-MIB::ibSmPortInfoInitType OID value, configure state conditions and alerts, and monitor any InfiniBand subnet manager node/switch (vendor-neutral IETF standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.117 | pm | IB-PM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.117.7 | ibSmMIB | IB-SM-MIB |
| 1.3.6.1.3.117.7.1 | ibSmMIBObjects | IB-SM-MIB |
| 1.3.6.1.3.117.7.1.3 | ibSmPortInfo | IB-SM-MIB |
| 1.3.6.1.3.117.7.1.3.1 | ibSmPortInfoTable | IB-SM-MIB |
| 1.3.6.1.3.117.7.1.3.1.1 | ibSmPortInfoEntry | IB-SM-MIB |
| 1.3.6.1.3.117.7.1.3.1.1.44 | ibSmPortInfoInitType | IB-SM-MIB |