All MIBs › Hub-rptr-prvt-sec › prptrSecurityPortAutoRplaceMode
prptrSecurityPortAutoRplaceMode
Module: Hub-rptr-prvt-sec
OID (symbolic): Hub-rptr-prvt-sec::prptrSecurityPortAutoRplaceMode
OID (numeric): 1.3.6.1.4.1.22.101.8.6.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Whenever this object is set to enable(2) the cam address entry for the port is automatically replaced by addresses received at that port which cause address mismatch. The replacement is effective only when both cam entries are valid. Whenever this object is set to disable(3), once the cam entries become valid they are never replaced.
The value other(1) is returned whenever the auto replace mode is unknown. This value should not be written into the agent.
What is prptrSecurityPortAutoRplaceMode?
This read-write field controls whether the port's CAM address entries are automatically replaced by new addresses that caused a mismatch, but only once both MAC entries are already valid; when disabled, valid entries are never overwritten. An admin enables this on a port where the attached device's MAC may legitimately change over time and shouldn't require manual reconfiguration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.101.8.6.1.1.13 snmpwalk -v2c -c public <target> Hub-rptr-prvt-sec::prptrSecurityPortAutoRplaceMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.101.8.6.1.1.13.1 snmpget -v2c -c public <target> Hub-rptr-prvt-sec::prptrSecurityPortAutoRplaceMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.101.8.6.1.1.13.1 i <value>
Start monitoring Legacy Fibronics managed Ethernet hub/repeater (port security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Hub-rptr-prvt-sec::prptrSecurityPortAutoRplaceMode OID value, configure state conditions and alerts, and monitor any Legacy Fibronics managed Ethernet hub/repeater (port security) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| 1.3.6.1.4.1.22.101 | mibs | ESM-snmp |
| 1.3.6.1.4.1.22.101.8 | mibseth_rptrs | ESM-snmp |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.101.8.6 | rptrSecurityPortInfo | Hub-rptr-prvt-sec |
| 1.3.6.1.4.1.22.101.8.6.1 | prptrSecurityPortTable | Hub-rptr-prvt-sec |
| 1.3.6.1.4.1.22.101.8.6.1.1 | prptrSecurityPortEntry | Hub-rptr-prvt-sec |
| 1.3.6.1.4.1.22.101.8.6.1.1.13 | prptrSecurityPortAutoRplaceMode | Hub-rptr-prvt-sec |