All MIBs › Hub-rptr-prvt-sec › prptrSecurityPortAdminState
prptrSecurityPortAdminState
Module: Hub-rptr-prvt-sec
OID (symbolic): Hub-rptr-prvt-sec::prptrSecurityPortAdminState
OID (numeric): 1.3.6.1.4.1.22.101.8.6.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When this object is set to enable(2) the port allows the employment of security according to the specific objects.
When this object is set to disable(3) the port stops employing security.
The value other(1) is returned whenever the admin state is unknown. This value may not be written into the agent.
Whenever this object is set to disable(3) the repeater port acts as if the following objects have the following values: prptrSecurityPortAutoLearnMode = disable(3), prptrSecurityPortBroadcastMode = accept(2), prptrSecurityPortMulticastMode = accept(2), prptrSecurityPortSAMismatch = disable(3), prptrSecurityPortDAMismatch = disable(3).
Whenever this object has the value of enable(2) the repeater port security functions according to the object's specific values.
What is prptrSecurityPortAdminState?
This read-write field turns port-level security on or off for this specific port; disable(3) forces the port's auto-learn, SA/DA mismatch checks off and broadcast/multicast to accept, while enable(2) lets the port's other security objects take effect. An admin sets this per port to activate MAC-based access control on just that port rather than the whole repeater.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.101.8.6.1.1.3 snmpwalk -v2c -c public <target> Hub-rptr-prvt-sec::prptrSecurityPortAdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.101.8.6.1.1.3.1 snmpget -v2c -c public <target> Hub-rptr-prvt-sec::prptrSecurityPortAdminState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.101.8.6.1.1.3.1 i <value>
Start monitoring Legacy Fibronics managed Ethernet hub/repeater (port security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Hub-rptr-prvt-sec::prptrSecurityPortAdminState OID value, configure state conditions and alerts, and monitor any Legacy Fibronics managed Ethernet hub/repeater (port security) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| 1.3.6.1.4.1.22.101 | mibs | ESM-snmp |
| 1.3.6.1.4.1.22.101.8 | mibseth_rptrs | ESM-snmp |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.101.8.6 | rptrSecurityPortInfo | Hub-rptr-prvt-sec |
| 1.3.6.1.4.1.22.101.8.6.1 | prptrSecurityPortTable | Hub-rptr-prvt-sec |
| 1.3.6.1.4.1.22.101.8.6.1.1 | prptrSecurityPortEntry | Hub-rptr-prvt-sec |
| 1.3.6.1.4.1.22.101.8.6.1.1.3 | prptrSecurityPortAdminState | Hub-rptr-prvt-sec |