All MIBs › Hub-rptr-prvt-sec › prptrSecurityGroupBroadcastMode
prptrSecurityGroupBroadcastMode
Module: Hub-rptr-prvt-sec
OID (symbolic): Hub-rptr-prvt-sec::prptrSecurityGroupBroadcastMode
OID (numeric): 1.3.6.1.4.1.22.101.8.5.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this variable to accept(2) will change the value of the object prptrSecurityPortBroadcastMode to accept(2) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. Setting this variable to reject(3) will change the value of the object prptrSecurityPortBroadcastMode to reject(3) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card.
The value other(1) is returned whenever the broadcast mode is unknown. This value should not be written into the agent.
What is prptrSecurityGroupBroadcastMode?
This read-write field, when set, propagates the same accept(2)/reject(3) broadcast-handling setting to prptrSecurityPortBroadcastMode on all 10BASE-T ports of LC342S cards and ports 1-8 of LC348S cards. An admin uses this as a shortcut to reject broadcast frames repeater-wide instead of configuring each port individually.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.101.8.5.1.1.4 snmpwalk -v2c -c public <target> Hub-rptr-prvt-sec::prptrSecurityGroupBroadcastMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.101.8.5.1.1.4.1 snmpget -v2c -c public <target> Hub-rptr-prvt-sec::prptrSecurityGroupBroadcastMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.101.8.5.1.1.4.1 i <value>
Start monitoring Legacy Fibronics managed Ethernet hub/repeater (port security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Hub-rptr-prvt-sec::prptrSecurityGroupBroadcastMode OID value, configure state conditions and alerts, and monitor any Legacy Fibronics managed Ethernet hub/repeater (port security) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| 1.3.6.1.4.1.22.101 | mibs | ESM-snmp |
| 1.3.6.1.4.1.22.101.8 | mibseth_rptrs | ESM-snmp |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.101.8.5 | rptrSecurityInfo | Hub-rptr-prvt-sec |
| 1.3.6.1.4.1.22.101.8.5.1 | prptrSecurityGroupTable | Hub-rptr-prvt-sec |
| 1.3.6.1.4.1.22.101.8.5.1.1 | prptrSecurityGroupEntry | Hub-rptr-prvt-sec |
| 1.3.6.1.4.1.22.101.8.5.1.1.4 | prptrSecurityGroupBroadcastMode | Hub-rptr-prvt-sec |