Hub-rptr-prvt-sec :: prptrSecurityAllPortsAdmin

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Hub-rptr-prvt-sec › prptrSecurityAllPortsAdmin

prptrSecurityAllPortsAdmin

Module: Hub-rptr-prvt-sec

OID (symbolic): Hub-rptr-prvt-sec::prptrSecurityAllPortsAdmin

OID (numeric): 1.3.6.1.4.1.22.101.8.5.1.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this variable to enable(2) will change the value of the object prptrSecurityPortAdminState to enable(2) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. Setting this variable to disable(3) will change the value of the object prptrSecurityPortAdminState to disable(3) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card.

The value other(1) is returned whenever the broadcast mode is unknown. This value should not be written into the agent.

What is prptrSecurityAllPortsAdmin?

This read-write field, when set, propagates the same enable(2)/disable(3) admin-state setting to prptrSecurityPortAdminState on all 10BASE-T ports of LC342S cards and ports 1-8 of LC348S cards. An admin uses this to turn per-port security on or off across the whole repeater in a single SNMP set rather than configuring each port separately.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.101.8.5.1.1.11
snmpwalk -v2c -c public <target> Hub-rptr-prvt-sec::prptrSecurityAllPortsAdmin

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.101.8.5.1.1.11.1
snmpget -v2c -c public <target> Hub-rptr-prvt-sec::prptrSecurityAllPortsAdmin.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22.101.8.5.1.1.11.1 i <value>

Start monitoring Legacy Fibronics managed Ethernet hub/repeater (port security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Hub-rptr-prvt-sec::prptrSecurityAllPortsAdmin OID value, configure state conditions and alerts, and monitor any Legacy Fibronics managed Ethernet hub/repeater (port security) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22spartacusCMU-MIB
1.3.6.1.4.1.22.101mibsESM-snmp
1.3.6.1.4.1.22.101.8mibseth_rptrsESM-snmp
Numeric OIDNameModule
1.3.6.1.4.1.22.101.8.5rptrSecurityInfoHub-rptr-prvt-sec
1.3.6.1.4.1.22.101.8.5.1prptrSecurityGroupTableHub-rptr-prvt-sec
1.3.6.1.4.1.22.101.8.5.1.1prptrSecurityGroupEntryHub-rptr-prvt-sec
1.3.6.1.4.1.22.101.8.5.1.1.11prptrSecurityAllPortsAdminHub-rptr-prvt-sec