All MIBs › HWG-PWR-MIB › inpAlarmState
inpAlarmState
Module: HWG-PWR-MIB
OID (symbolic): HWG-PWR-MIB::inpAlarmState
OID (numeric): 1.3.6.1.4.1.21796.4.6.2.2.1.5
Node type: OBJECT-TYPE
Type: AlarmState
Access: read-only
Description: The binary input alarm state.
What is inpAlarmState?
This read-only value reports whether this binary input's current state should be treated as invalid(0), normal(1), or alarm(2). An admin uses it, together with the inContactStateToAlarm trap, to detect when a monitored dry contact has entered an alarm condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.21796.4.6.2.2.1.5 snmpwalk -v2c -c public <target> HWG-PWR-MIB::inpAlarmState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.21796.4.6.2.2.1.5.1 snmpget -v2c -c public <target> HWG-PWR-MIB::inpAlarmState.1
Start monitoring HW group environmental/power monitoring device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HWG-PWR-MIB::inpAlarmState OID value, configure state conditions and alerts, and monitor any HW group environmental/power monitoring device from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.21796 | hwgroup | DAMOCLES-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.21796.4 | x390 | HWG-PWR-MIB |
| 1.3.6.1.4.1.21796.4.6 | hwgpwr | HWG-PWR-MIB |
| 1.3.6.1.4.1.21796.4.6.2 | input | HWG-PWR-MIB |
| 1.3.6.1.4.1.21796.4.6.2.2 | inpTable | HWG-PWR-MIB |
| 1.3.6.1.4.1.21796.4.6.2.2.1 | inpEntry | HWG-PWR-MIB |
| 1.3.6.1.4.1.21796.4.6.2.2.1.5 | inpAlarmState | HWG-PWR-MIB |