All MIBs › HUAWEI-MPLS-TP-MIB › hwMplsTpTunnelOperStatus
hwMplsTpTunnelOperStatus
Module: HUAWEI-MPLS-TP-MIB
OID (symbolic): HUAWEI-MPLS-TP-MIB::hwMplsTpTunnelOperStatus
OID (numeric): 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the actual operational status of this tunnel, which is but not limited to the status of this tunnel of a certain period.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates that the operational status of this tunnel is up. 2. down(2) -indicates that the operational status of this tunnel is down. 3. testing(3) -indicates that the tunnel is used in some test mode. 4. unknown(4) -indicates the invalid value. 5. dormant(5) -indicates that the status can not be determined. 6. notPresent(6) -indicates that some component is missing 7. lowerLayerDown(7) -indicates the Down state due to the state of lower layer interfaces.
What is hwMplsTpTunnelOperStatus?
This object reports the tunnel's actual real-time operational state, with finer-grained values than the administrative status, including lowerLayerDown and notPresent. Admins monitor it to detect genuine MPLS-TP tunnel outages; for instance, lowerLayerDown(7) points directly at a failure in the underlying physical or logical interface rather than a problem with the tunnel configuration itself. For example, if this object reports lowerLayerDown(7) while the tunnel's admin status is still up(1), the admin should check the physical link beneath the tunnel rather than the tunnel setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.9 snmpwalk -v2c -c public <target> HUAWEI-MPLS-TP-MIB::hwMplsTpTunnelOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.9.1 snmpget -v2c -c public <target> HUAWEI-MPLS-TP-MIB::hwMplsTpTunnelOperStatus.1
Start monitoring Huawei PTN (Packet Transport Network) / MPLS-TP capable router or switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-MPLS-TP-MIB::hwMplsTpTunnelOperStatus OID value, configure state conditions and alerts, and monitor any Huawei PTN (Packet Transport Network) / MPLS-TP capable router or switch from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.305 | hwMplsTpMib | HUAWEI-MPLS-TP-MIB |
| 1.3.6.1.4.1.2011.5.25.305.1 | hwMplsTpObjects | HUAWEI-MPLS-TP-MIB |
| 1.3.6.1.4.1.2011.5.25.305.1.1 | hwMplsTpTables | HUAWEI-MPLS-TP-MIB |
| 1.3.6.1.4.1.2011.5.25.305.1.1.1 | hwMplsTpTunnelTable | HUAWEI-MPLS-TP-MIB |
| 1.3.6.1.4.1.2011.5.25.305.1.1.1.1 | hwMplsTpTunnelEntry | HUAWEI-MPLS-TP-MIB |
| 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.9 | hwMplsTpTunnelOperStatus | HUAWEI-MPLS-TP-MIB |