All MIBs › HUAWEI-ISIS-CONF-MIB › hwIsisCircMeshBlock
hwIsisCircMeshBlock
Module: HUAWEI-ISIS-CONF-MIB
OID (symbolic): HUAWEI-ISIS-CONF-MIB::hwIsisCircMeshBlock
OID (numeric): 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.34
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: The value of this object identifies the mesh block function. If this function is configured, the set mesh-group ID is deleted. The value of this object can be: enable(1): enables the mesh block function. disable(2): disables the mesh block function. By default, the function is disabled.
What is hwIsisCircMeshBlock?
This enables or disables the mesh-block function on this interface, which stops IS-IS from flooding LSPs back out a fully-meshed interface: enable(1) turns it on, disable(2) (the default) turns it off. Enabling this clears any configured mesh-group ID, since the two features are mutually exclusive.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25.24 | hwISIS | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.24.2 | hwIsisConf | HUAWEI-ISIS-CONF-MIB |
| 1.3.6.1.4.1.2011.5.25.24.2.1 | hwIsisMIBObjects | HUAWEI-ISIS-CONF-MIB |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21 | hwIsisIntfBaseTable | HUAWEI-ISIS-CONF-MIB |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1 | hwIsisIntfBaseEntry | HUAWEI-ISIS-CONF-MIB |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.34 | hwIsisCircMeshBlock | HUAWEI-ISIS-CONF-MIB |