All MIBs › HUAWEI-ENERGYMNGT-MIB › hwEnergyFtpOperStatus
hwEnergyFtpOperStatus
Module: HUAWEI-ENERGYMNGT-MIB
OID (symbolic): HUAWEI-ENERGYMNGT-MIB::hwEnergyFtpOperStatus
OID (numeric): 1.3.6.1.4.1.2011.6.157.4.1.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The OperStatus: opInProgress(1): the operation is in process. opSuccess(2): the operation has been completed successfully. opInvalid(3): the command is invalid or command-protocol-device combination is unsupported by the system. opInvalidProtocol(4): invalid protocol is specified opInvalidSourceName(5) :invalid source file name is specified. opInvalidDestName(6): invalid target name is specified. opInvalidServerAddress(7): invalid server address is specified opDeviceBusy(8): the device is in use and locked by another process opDeviceError(9): device read, write or erase error opFileOpenError(10) :invalid file name; file not found in partition opFileTransferError(11) :file transfer was unsuccessfull opFileChecksumError(12) :file checksum in Flash is invalid opAuthFail(13) :authentication failure opUnknownFailure(14) :failure which is unknown opAbort(15) : transfer operation has been aborted opInvalidSourceAddress(16): invalid source IP is specified. opInvalidSourceInterface(17): invalid source interface is specified.
What is hwEnergyFtpOperStatus?
Reports the outcome of the most recent FTP/SFTP/TFTP transfer used to fetch or push an energy-saving capability file, ranging from opInProgress and opSuccess to specific failure codes like opAuthFail or opFileTransferError.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.157.4.1.1.15 snmpwalk -v2c -c public <target> HUAWEI-ENERGYMNGT-MIB::hwEnergyFtpOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.157.4.1.1.15.1 snmpget -v2c -c public <target> HUAWEI-ENERGYMNGT-MIB::hwEnergyFtpOperStatus.1
Start monitoring Huawei router or switch (power consumption/energy-saving policy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-ENERGYMNGT-MIB::hwEnergyFtpOperStatus OID value, configure state conditions and alerts, and monitor any Huawei router or switch (power consumption/energy-saving policy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.157 | hwEnergyMngt | HUAWEI-ENERGYMNGT-MIB |
| 1.3.6.1.4.1.2011.6.157.4 | hwEnergyFtpcObjects | HUAWEI-ENERGYMNGT-MIB |
| 1.3.6.1.4.1.2011.6.157.4.1 | hwEnergyFtpcTransFileTable | HUAWEI-ENERGYMNGT-MIB |
| 1.3.6.1.4.1.2011.6.157.4.1.1 | hwEnergyFtpcTransFileEntry | HUAWEI-ENERGYMNGT-MIB |
| 1.3.6.1.4.1.2011.6.157.4.1.1.15 | hwEnergyFtpOperStatus | HUAWEI-ENERGYMNGT-MIB |