All MIBs › HUAWEI-COMMTEST-MIB › hwTestBoardStatusQueryTestItem
hwTestBoardStatusQueryTestItem
Module: HUAWEI-COMMTEST-MIB
OID (symbolic): HUAWEI-COMMTEST-MIB::hwTestBoardStatusQueryTestItem
OID (numeric): 1.3.6.1.4.1.2011.6.21.1.1.1.5.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Test item. Options: 1. testIdle(1) -idle 2. pstnUserInLineTest(2) -pstn inline test 3. userLineTest(3) -loop line test 4. phoneTest(4) -telephone test 5. manTestOutLine(5) -manual test outline 6. manTestInnerLine(6) -manual test inline 7. halfAutoUserCircuit(7) -half auto tss user circuit -meter interface 8. halfAutoTssPhoneCircuit(8) -half auto tss telephone circuit -meter interface 9. tssSelfTest(9) -Tss self test 10. testInnerBus(10) -test inline bus test 11. testOuterBus(11) -test outline bus test 12. digUserOutLineTest(12) -isdn outline test 13. digUserInnerLineTest(13) -isdn inline test 14. switchToStandIsdnTerminal(14) -switch to standard isdn terminal 15. switchToIsdnSpecialcode(15) -switch to isdn special service telephone number 16. testBoarDfault(16) -test board fault 17. pstnRemoteCallTest(17) -pstn user remote call test 18. indialtest(18) -in-dial test 19. coEmulate(33) -CO simulation test 20. cqtTest(34) -CQT test 21. cqtFRTest(35) -CQT Frequency Response Measurement 22. cqtTDRTest(36) -CQT Time Domain Reflectometry Measurement 23. cqtDMTTest(37) -CQT Data Rate Prediction Measurement 24. cqtNSETest(38) -CQT Noise Measurement 25. cqtLBTest(39) -CQT Longitudinal Balance Measurement 26. cqtLCTest(40) -CQT Load Coil Detection 27. internalcaptureTestedPort(61) -Capture tested port loopline 28. externalcaptureTestedPort(62) -Capture tested port inline 29. monitorTest(63) -monitor test 30. seltTest(64) -selt test 31. sendtoneTest(65) -tone send test 32. checktoneTest(66) -tone check test 33. autocalltest(67) -auto call test 34. anothermainboardistesting(241) -another main board is testing
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.21.1.1.1.5.1.4 snmpwalk -v2c -c public <target> HUAWEI-COMMTEST-MIB::hwTestBoardStatusQueryTestItem
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.21.1.1.1.5.1.4.1 snmpget -v2c -c public <target> HUAWEI-COMMTEST-MIB::hwTestBoardStatusQueryTestItem.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hwTestBoardStatusQueryTestItem.1
Start monitoring Huawei DSLAM/MSAN broadband access equipment (MELT copper-line/ping/traceroute test) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-COMMTEST-MIB::hwTestBoardStatusQueryTestItem OID value, configure state conditions and alerts, and monitor any Huawei DSLAM/MSAN broadband access equipment (MELT copper-line/ping/traceroute test) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.6.21 | hwTest | HUAWEI-BTEST-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.21.1 | hwTestCommon | HUAWEI-COMMTEST-MIB |
| 1.3.6.1.4.1.2011.6.21.1.1 | hwTestCommonMib | HUAWEI-COMMTEST-MIB |
| 1.3.6.1.4.1.2011.6.21.1.1.1 | hwTestCommonMIBObjects | HUAWEI-COMMTEST-MIB |
| 1.3.6.1.4.1.2011.6.21.1.1.1.5 | hwTestBoardStatusQueryOprTable | HUAWEI-COMMTEST-MIB |
| 1.3.6.1.4.1.2011.6.21.1.1.1.5.1 | hwTestBoardStatusQueryOprEntry | HUAWEI-COMMTEST-MIB |
| 1.3.6.1.4.1.2011.6.21.1.1.1.5.1.4 | hwTestBoardStatusQueryTestItem | HUAWEI-COMMTEST-MIB |