All MIBs › HPN-ICF-USERLOG-MIB › hpnicfUserlogNatActiveTime
hpnicfUserlogNatActiveTime
Module: HPN-ICF-USERLOG-MIB
OID (symbolic): HPN-ICF-USERLOG-MIB::hpnicfUserlogNatActiveTime
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The active time for long-time existed NAT flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, NAT flow can be logged after an interval of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled.
What is hpnicfUserlogNatActiveTime?
Sets, in minutes (10-120, default 0), the active-time interval after which a long-lived NAT flow gets logged again for real-time monitoring; the default of 0 disables this periodic re-logging. An admin sets a value here to periodically re-report NAT flows that stay open for a long time, rather than only logging them once at creation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.5 snmpwalk -v2c -c public <target> HPN-ICF-USERLOG-MIB::hpnicfUserlogNatActiveTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.5.1 snmpget -v2c -c public <target> HPN-ICF-USERLOG-MIB::hpnicfUserlogNatActiveTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.5.1 i <value>
Start monitoring HP Networking (H3C-derived) equipment (NAT/flow user activity logging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-USERLOG-MIB::hpnicfUserlogNatActiveTime OID value, configure state conditions and alerts, and monitor any HP Networking (H3C-derived) equipment (NAT/flow user activity logging) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8 | hpnicfRhw | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.18 | hpnicfUserLogMIB | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1 | hpnicfUserlogObjects | HPN-ICF-USERLOG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1 | hpnicfUserlogNatObjects | HPN-ICF-USERLOG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.5 | hpnicfUserlogNatActiveTime | HPN-ICF-USERLOG-MIB |