All MIBs › HPN-ICF-RS485-MIB › hpnicfRS485ResetCharacters
hpnicfRS485ResetCharacters
Module: HPN-ICF-RS485-MIB
OID (symbolic): HPN-ICF-RS485-MIB::hpnicfRS485ResetCharacters
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Reset the counters to zero, inlucding hpnicfRS485TXCharacters, hpnicfRS485RXCharacters, hpnicfRS485TXErrCharacters and hpnicfRS485RXErrCharacters.
What is hpnicfRS485ResetCharacters?
This read-write value, when set to clear(2), zeroes out the port's TX/RX character and error counters; reading or leaving it at counting(1) leaves the counters running normally. An admin sets this to clear(2) to get a clean baseline of traffic counters before starting a serial troubleshooting session. For example, setting hpnicfRS485ResetCharacters to clear(2) resets hpnicfRS485TXCharacters, hpnicfRS485RXCharacters, and their error counters to zero right before testing a newly reconfigured serial link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.11 snmpwalk -v2c -c public <target> HPN-ICF-RS485-MIB::hpnicfRS485ResetCharacters
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.11.1 snmpget -v2c -c public <target> HPN-ICF-RS485-MIB::hpnicfRS485ResetCharacters.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.11.1 i <value>
Start monitoring HP/H3C Comware switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-RS485-MIB::hpnicfRS485ResetCharacters OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switches from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.109 | hpnicfRS485 | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.109.1 | hpnicfRS485Properties | HPN-ICF-RS485-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.109.1.1 | hpnicfRS485PropertiesTable | HPN-ICF-RS485-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1 | hpnicfRS485PropertiesEntry | HPN-ICF-RS485-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.11 | hpnicfRS485ResetCharacters | HPN-ICF-RS485-MIB |