All MIBs › HPN-ICF-RPR-MIB › hpnicfRprMaxReservedRateDefine
hpnicfRprMaxReservedRateDefine
Module: HPN-ICF-RPR-MIB
OID (symbolic): HPN-ICF-RPR-MIB::hpnicfRprMaxReservedRateDefine
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.3
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description: Max reserved rate supported by each RPR ringlet. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
What is hpnicfRprMaxReservedRateDefine?
A read-only gauge, in units of 1,000,000 bits per second, giving the maximum reserved bandwidth rate each RPR ringlet on this interface supports. Operators use this as the ceiling when allocating per-station reserved rates, since the sum across all stations on a ringlet cannot exceed it without triggering a hpnicfRprExceedMaxReservRate trap.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.3 snmpwalk -v2c -c public <target> HPN-ICF-RPR-MIB::hpnicfRprMaxReservedRateDefine
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.3.1 snmpget -v2c -c public <target> HPN-ICF-RPR-MIB::hpnicfRprMaxReservedRateDefine.1
Start monitoring HP/Comware router/switch with RPR (Resilient Packet Ring) interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-RPR-MIB::hpnicfRprMaxReservedRateDefine OID value, configure state conditions and alerts, and monitor any HP/Comware router/switch with RPR (Resilient Packet Ring) interfaces from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.60 | hpnicfRpr | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.60.1 | hpnicfRprObjects | HPN-ICF-RPR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.60.1.1 | hpnicfRprMaxmumDefine | HPN-ICF-RPR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1 | hpnicfRprMaxmumDefineTable | HPN-ICF-RPR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1 | hpnicfRprMaxmumDefineEntry | HPN-ICF-RPR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.3 | hpnicfRprMaxReservedRateDefine | HPN-ICF-RPR-MIB |