All MIBs › HPN-ICF-POWER-ETH-EXT-MIB › hpnicfPseProfilePairs
hpnicfPseProfilePairs
Module: HPN-ICF-POWER-ETH-EXT-MIB
OID (symbolic): HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfilePairs
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in use. A value of spare(2) means that the spare pairs only are in use.
What is hpnicfPseProfilePairs?
This read-create setting picks which wire pairs a profile's ports use for power delivery per IEEE 802.3af: signal(1) uses the data pairs, spare(2) uses the unused pairs, and it's only writable if pethPsePortPowerPairsControl allows it. An admin would choose spare(2) for a profile targeting cabling where the data pairs must stay dedicated to Ethernet-only signaling.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14 | hpnicfPowerEthernetExt | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7 | hpnicfPseProfilesTable | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1 | hpnicfPseProfilesEntry | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.6 | hpnicfPseProfilePairs | HPN-ICF-POWER-ETH-EXT-MIB |