All MIBs › HPN-ICF-POWER-ETH-EXT-MIB › hpnicfPsePortPeakPower
hpnicfPsePortPeakPower
Module: HPN-ICF-POWER-ETH-EXT-MIB
OID (symbolic): HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortPeakPower
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The object specifies the peak power which has been consumed by the port. It is defined as the highest measured value of power in milliWatts that has been consumed by the port. Its value is only reset when link is lost, the port is PoE disabled or when it is manually reset by the user asspecified below. It is a read/write integer value with units of milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned.
What is hpnicfPsePortPeakPower?
This read-write counter records the highest instantaneous power, in milliwatts, this PoE port has delivered since the link last went down, PoE was disabled, or an admin manually cleared it. Writing zero resets the peak back to zero, which is useful before starting a load test on a phone or camera; writing any other value is rejected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.3 snmpwalk -v2c -c public <target> HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortPeakPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.3.1 snmpget -v2c -c public <target> HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortPeakPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.3.1 i <value>
Start monitoring HP/H3C Comware-based Ethernet switch with PoE ports (extended power-budget/class) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortPeakPower OID value, configure state conditions and alerts, and monitor any HP/H3C Comware-based Ethernet switch with PoE ports (extended power-budget/class) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14 | hpnicfPowerEthernetExt | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1 | hpnicfPsePortTable | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1 | hpnicfPsePortEntry | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.3 | hpnicfPsePortPeakPower | HPN-ICF-POWER-ETH-EXT-MIB |