HPN-ICF-POWER-ETH-EXT-MIB :: hpnicfPseAutoDetectActive

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-POWER-ETH-EXT-MIBhpnicfPseAutoDetectActive

hpnicfPseAutoDetectActive

Module: HPN-ICF-POWER-ETH-EXT-MIB

OID (symbolic): HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseAutoDetectActive

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.14.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The object specifies whether the device auto-detection feature is active. If this object is set to Active, and a known powered device is detected, then the port will automatically switch to Auto-Guaranteed mode. This is a stackwide object (ie. it is not referenced by group index).

What is hpnicfPseAutoDetectActive?

This read-write, stack-wide (not per-group) setting controls automatic detection of known powered devices: when enabled(3), the port switches itself to Auto-Guaranteed power mode as soon as a recognized PD is plugged in. An admin running notSupported(1) or disabled(2) would instead need to manually configure guaranteed mode on ports as devices are added.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.3
snmpwalk -v2c -c public <target> HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseAutoDetectActive

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.3.1
snmpget -v2c -c public <target> HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseAutoDetectActive.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.3.1 i <value>

Start monitoring HP/H3C Comware-based Ethernet switch with PoE ports (extended power-budget/class) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseAutoDetectActive OID value, configure state conditions and alerts, and monitor any HP/H3C Comware-based Ethernet switch with PoE ports (extended power-budget/class) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.14hpnicfPowerEthernetExtHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.14.3hpnicfPseAutoDetectActiveHPN-ICF-POWER-ETH-EXT-MIB