All MIBs › HPN-ICF-POWER-ETH-EXT-MIB › hpnicfPOESwitchStateInVolAB
hpnicfPOESwitchStateInVolAB
Module: HPN-ICF-POWER-ETH-EXT-MIB
OID (symbolic): HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateInVolAB
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.2
Node type: OBJECT-TYPE
Type: ACAlarmState
Access: read-only
Description: The object specifies the VOL AB alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7).
What is hpnicfPOESwitchStateInVolAB?
This read-only enumerated value reports the phase A-to-B voltage alarm state: normal, underLimit, aboveLimit, lackPhrase, fuseBroken, switchOff, or otherError. An admin uses this alongside the BC and CA readings to pinpoint which phase pair on a three-phase AC feed has an out-of-range voltage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.2 snmpwalk -v2c -c public <target> HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateInVolAB
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.2.1 snmpget -v2c -c public <target> HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateInVolAB.1
Start monitoring HP/H3C Comware-based Ethernet switch with PoE ports (extended power-budget/class) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateInVolAB OID value, configure state conditions and alerts, and monitor any HP/H3C Comware-based Ethernet switch with PoE ports (extended power-budget/class) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14 | hpnicfPowerEthernetExt | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8 | hpnicfPOEPowerObjects | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6 | hpnicfPOEInCurStateObjects | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5 | hpnicfPOESwitchStateVolExTable | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1 | hpnicfPOESwitchStateVolExEntry | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.2 | hpnicfPOESwitchStateInVolAB | HPN-ICF-POWER-ETH-EXT-MIB |