All MIBs › HPN-ICF-POWER-ETH-EXT-MIB › hpnicfMainPsePriorityMode
hpnicfMainPsePriorityMode
Module: HPN-ICF-POWER-ETH-EXT-MIB
OID (symbolic): HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPsePriorityMode
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Describes or controls the priority mode on slot which must be enabled firstly. When a new board is inserted, and the power is over-load, a value of disconnection(0) means that the power will stop supply to the low priority slot ; A value of non-disconnection(1) means that the slot still supply when a new board is inserted, and the power is over-load too.
What is hpnicfMainPsePriorityMode?
This read-write setting controls what happens when a newly inserted board overloads the power supply: disconnection(0) cuts power to the lowest-priority slot to make room, while non-disconnection(1) keeps all slots powered even though the unit is over budget. An admin running a chassis near its power ceiling would pick disconnection(0) to protect overall stability when adding new modules.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.5 snmpwalk -v2c -c public <target> HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPsePriorityMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.5.1 snmpget -v2c -c public <target> HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPsePriorityMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfMainPsePriorityMode.1
Start monitoring HP/H3C Comware-based Ethernet switch with PoE ports (extended power-budget/class) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPsePriorityMode OID value, configure state conditions and alerts, and monitor any HP/H3C Comware-based Ethernet switch with PoE ports (extended power-budget/class) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14 | hpnicfPowerEthernetExt | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2 | hpnicfMainPseTable | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1 | hpnicfMainPseEntry | HPN-ICF-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.5 | hpnicfMainPsePriorityMode | HPN-ICF-POWER-ETH-EXT-MIB |