All MIBs › HPN-ICF-NQA-MIB › hpnicfNqaProbeTimeOverThreshold
hpnicfNqaProbeTimeOverThreshold
Module: HPN-ICF-NQA-MIB
OID (symbolic): HPN-ICF-NQA-MIB::hpnicfNqaProbeTimeOverThreshold
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.3.3.1
Node type: NOTIFICATION-TYPE
Description: It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold.
The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdConsecNum.
This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hpnicfNqajitter.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' HPN-ICF-NQA-MIB::hpnicfNqaProbeTimeOverThreshold snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.11.2.14.11.15.8.3.3.1
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:53293->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (142101549) 16 days, 10:43:35.49 SNMPv2-MIB::snmpTrapOID.0 = OID: HPN-ICF-NQA-MIB::hpnicfNqaProbeTimeOverThreshold
Start monitoring HP Networking (H3C-derived) equipment (NQA synthetic-test probes) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-NQA-MIB::hpnicfNqaProbeTimeOverThreshold OID value, configure state conditions and alerts, and monitor any HP Networking (H3C-derived) equipment (NQA synthetic-test probes) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8 | hpnicfRhw | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.3 | hpnicfNqa | HPN-ICF-NQA-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3 | hpnicfNqaNotifications | HPN-ICF-NQA-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.1 | hpnicfNqaProbeTimeOverThreshold | HPN-ICF-NQA-MIB |