All MIBs › HPN-ICF-NQA-MIB › hpnicfNqaJitterRTTOverThreshold
hpnicfNqaJitterRTTOverThreshold
Module: HPN-ICF-NQA-MIB
OID (symbolic): HPN-ICF-NQA-MIB::hpnicfNqaJitterRTTOverThreshold
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.3.3.2
Node type: NOTIFICATION-TYPE
Description: It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold.
The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test.
This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' HPN-ICF-NQA-MIB::hpnicfNqaJitterRTTOverThreshold snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.11.2.14.11.15.8.3.3.2
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:49559->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (124589975) 14 days, 10:04:59.75 SNMPv2-MIB::snmpTrapOID.0 = OID: HPN-ICF-NQA-MIB::hpnicfNqaJitterRTTOverThreshold
Start monitoring HP Networking (H3C-derived) equipment (NQA synthetic-test probes) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-NQA-MIB::hpnicfNqaJitterRTTOverThreshold OID value, configure state conditions and alerts, and monitor any HP Networking (H3C-derived) equipment (NQA synthetic-test probes) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8 | hpnicfRhw | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.3 | hpnicfNqa | HPN-ICF-NQA-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3 | hpnicfNqaNotifications | HPN-ICF-NQA-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.2 | hpnicfNqaJitterRTTOverThreshold | HPN-ICF-NQA-MIB |