All MIBs › HPN-ICF-MPLS-LDP-MIB › hpnicfMplsLdpLsrLoopDetectionAdminStatus
hpnicfMplsLdpLsrLoopDetectionAdminStatus
Module: HPN-ICF-MPLS-LDP-MIB
OID (symbolic): HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrLoopDetectionAdminStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'.
What is hpnicfMplsLdpLsrLoopDetectionAdminStatus?
Turns LDP loop detection on (enabled) or off (disabled) for this LSR; an admin would enable it in topologies where routing loops could otherwise cause LDP messages to circulate indefinitely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.3 snmpwalk -v2c -c public <target> HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrLoopDetectionAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.3.1 snmpget -v2c -c public <target> HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrLoopDetectionAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.3.1 i <value>
Start monitoring HP/Comware router/switch running MPLS with LDP with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrLoopDetectionAdminStatus OID value, configure state conditions and alerts, and monitor any HP/Comware router/switch running MPLS with LDP from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8 | hpnicfRhw | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12 | hpnicfMpls | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.12.2 | hpnicfMplsLdp | HPN-ICF-MPLS-LDP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1 | hpnicfMplsLdpObjects | HPN-ICF-MPLS-LDP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1 | hpnicfMplsLdpLsrObjects | HPN-ICF-MPLS-LDP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1 | hpnicfMplsLdpLsrIncarnTable | HPN-ICF-MPLS-LDP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1 | hpnicfMplsLdpLsrIncarnEntry | HPN-ICF-MPLS-LDP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.3 | hpnicfMplsLdpLsrLoopDetectionAdminStatus | HPN-ICF-MPLS-LDP-MIB |