HPN-ICF-LswVLAN-MIB :: hpnicfifSubVlanlistHigh

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-LswVLAN-MIBhpnicfifSubVlanlistHigh

hpnicfifSubVlanlistHigh

Module: HPN-ICF-LswVLAN-MIB

OID (symbolic): HPN-ICF-LswVLAN-MIB::hpnicfifSubVlanlistHigh

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'.

What is hpnicfifSubVlanlistHigh?

This read-write bitmap (up to 256 octets) covers the upper VLAN range 2049-4094, working like hpnicfifSubVlanlistLow but for higher-numbered VLANs, with the first octet covering VLANs 2049-2056, the second 2057-2064, and so on. Use it together with the Low object to map sub-VLANs spanning the full VLAN ID range under a super VLAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3
snmpwalk -v2c -c public <target> HPN-ICF-LswVLAN-MIB::hpnicfifSubVlanlistHigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3.1
snmpget -v2c -c public <target> HPN-ICF-LswVLAN-MIB::hpnicfifSubVlanlistHigh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3.1 s <value>

Start monitoring HP Comware switch (VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-LswVLAN-MIB::hpnicfifSubVlanlistHigh OID value, configure state conditions and alerts, and monitor any HP Comware switch (VLAN configuration) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.8hpnicfRhwHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35hpnicflswCommonHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.8.35.2hpnicfLswVlanHPN-ICF-LswVLAN-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.2.1hpnicfLswVlanMngObjectHPN-ICF-LswVLAN-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7hpnicfifSuperVlanMappingTableHPN-ICF-LswVLAN-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1hpnicfifSuperVlanMappingEntryHPN-ICF-LswVLAN-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3hpnicfifSubVlanlistHighHPN-ICF-LswVLAN-MIB