All MIBs › HPN-ICF-LswVLAN-MIB › hpnicfSecondaryVlanlistHigh
hpnicfSecondaryVlanlistHigh
Module: HPN-ICF-LswVLAN-MIB
OID (symbolic): HPN-ICF-LswVLAN-MIB::hpnicfSecondaryVlanlistHigh
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
What is hpnicfSecondaryVlanlistHigh?
This read-write bitmap (up to 256 octets) covers the upper VLAN range 2049-4094, working like hpnicfSecondaryVlanlistLow but for higher-numbered VLANs, with the first octet covering VLANs 2049-2056, the second 2057-2064, and so on. Use it together with the Low object to map secondary VLANs spanning the full VLAN ID range under a private-VLAN's primary VLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3 snmpwalk -v2c -c public <target> HPN-ICF-LswVLAN-MIB::hpnicfSecondaryVlanlistHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3.1 snmpget -v2c -c public <target> HPN-ICF-LswVLAN-MIB::hpnicfSecondaryVlanlistHigh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3.1 s <value>
Start monitoring HP Comware switch (VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-LswVLAN-MIB::hpnicfSecondaryVlanlistHigh OID value, configure state conditions and alerts, and monitor any HP Comware switch (VLAN configuration) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8 | hpnicfRhw | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35 | hpnicflswCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2 | hpnicfLswVlan | HPN-ICF-LswVLAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1 | hpnicfLswVlanMngObject | HPN-ICF-LswVLAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8 | hpnicfPrivateVlanMappingTable | HPN-ICF-LswVLAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1 | hpnicfPrivateVlanMappingEntry | HPN-ICF-LswVLAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3 | hpnicfSecondaryVlanlistHigh | HPN-ICF-LswVLAN-MIB |