All MIBs › HPN-ICF-LLDP-EXT-MIB › hpnicflldpPortConfigCDPComplianceStatus
hpnicflldpPortConfigCDPComplianceStatus
Module: HPN-ICF-LLDP-EXT-MIB
OID (symbolic): HPN-ICF-LLDP-EXT-MIB::hpnicflldpPortConfigCDPComplianceStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The administratively desired CDP Compliance status of the local LLDP a- gent. If the associated hpnicflldpPortConfigCDPComplianceStatus object has a value of 'txAndRx', then the LLDP agent will receive CDP frames on th- is port, and will transmit CDP frames only after receive a CDP frames. If the associated lldpPortConfigAdminStatus object has a value of 'disa- bled', LLDP agent will not transmit or receive CDP frames on this port.
What is hpnicflldpPortConfigCDPComplianceStatus?
This per-port setting controls whether the LLDP agent on a specific interface also handles CDP frames: txAndRx(1) makes the port listen for CDP frames from its neighbor and start transmitting its own once it receives one, while disabled(2) means the port ignores CDP entirely. An admin sets this on ports facing legacy equipment that needs CDP-based discovery rather than LLDP. For example, setting a port connected to an old Cisco IP phone to txAndRx(1) lets the switch detect and reply to that phone via CDP, while a port facing a pure LLDP-only host is left at disabled(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3.1.2 snmpwalk -v2c -c public <target> HPN-ICF-LLDP-EXT-MIB::hpnicflldpPortConfigCDPComplianceStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3.1.2.1 snmpget -v2c -c public <target> HPN-ICF-LLDP-EXT-MIB::hpnicflldpPortConfigCDPComplianceStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3.1.2.1 i <value>
Start monitoring HP/H3C Comware switch or router (LLDP/CDP interoperability) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-LLDP-EXT-MIB::hpnicflldpPortConfigCDPComplianceStatus OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch or router (LLDP/CDP interoperability) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.100 | hpnicflldp | HPN-ICF-LLDP-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.100.1 | hpnicflldpObjects | HPN-ICF-LLDP-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.100.1.1 | hpnicflldpConfiguration | HPN-ICF-LLDP-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3 | hpnicflldpPortConfigTable | HPN-ICF-LLDP-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3.1 | hpnicflldpPortConfigEntry | HPN-ICF-LLDP-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3.1.2 | hpnicflldpPortConfigCDPComplianceStatus | HPN-ICF-LLDP-EXT-MIB |