All MIBs › HPN-ICF-IPSEC-MONITOR-V2-MIB › hpnicfIPsecTunIKETunRemoteIDVal2V2
hpnicfIPsecTunIKETunRemoteIDVal2V2
Module: HPN-ICF-IPSEC-MONITOR-V2-MIB
OID (symbolic): HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunRemoteIDVal2V2
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.9
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The second specification of the remote peer's IP address for the associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the IKETunnelTable).
If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask.
If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range.
If the remote peer type is others, this is a zero-length string.
What is hpnicfIPsecTunIKETunRemoteIDVal2V2?
Reports a second, complementary value for the remote peer's identity, holding a subnet mask or a range's ending address when applicable, or a zero-length string otherwise. It works alongside hpnicfIPsecTunIKETunRemoteIDVal1V2 to fully specify subnet or range-based remote identities.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.9 snmpwalk -v2c -c public <target> HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunRemoteIDVal2V2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.9.1 snmpget -v2c -c public <target> HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunRemoteIDVal2V2.1
Start monitoring HPE/H3C Comware VPN gateway/firewall (IPsec tunnel stats, v2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunRemoteIDVal2V2 OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware VPN gateway/firewall (IPsec tunnel stats, v2) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.126 | hpnicfIPsecMonitorV2 | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1 | hpnicfIPsecObjectsV2 | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1.2 | hpnicfIPsecTunnelV2Table | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1 | hpnicfIPsecTunnelV2Entry | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.9 | hpnicfIPsecTunIKETunRemoteIDVal2V2 | HPN-ICF-IPSEC-MONITOR-V2-MIB |