All MIBs › HPN-ICF-IPSEC-MONITOR-V2-MIB › hpnicfIPsecTrafficRemAddr2V2
hpnicfIPsecTrafficRemAddr2V2
Module: HPN-ICF-IPSEC-MONITOR-V2-MIB
OID (symbolic): HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr2V2
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.14
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-only
Description: The second IP address specification of the remote peer's traffic.
If the remote traffic type is single IP address, this is the IP address.
If the remote traffic type is IP subnet, this is the subnet mask.
If the remote traffic type is IP address range, this is the ending IP address of the range.
What is hpnicfIPsecTrafficRemAddr2V2?
Reports the second address value defining the remote traffic selector, meaning either the same address repeated, the subnet mask, or the ending address of a range, depending on the traffic type. Combined with the first remote address value, it fully specifies the remote protected traffic when the selector is a subnet or range.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.14 snmpwalk -v2c -c public <target> HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr2V2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.14.1 snmpget -v2c -c public <target> HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr2V2.1
Start monitoring HPE/H3C Comware VPN gateway/firewall (IPsec tunnel stats, v2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr2V2 OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware VPN gateway/firewall (IPsec tunnel stats, v2) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.126 | hpnicfIPsecMonitorV2 | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1 | hpnicfIPsecObjectsV2 | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5 | hpnicfIPsecTrafficV2Table | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1 | hpnicfIPsecTrafficV2Entry | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.14 | hpnicfIPsecTrafficRemAddr2V2 | HPN-ICF-IPSEC-MONITOR-V2-MIB |