All MIBs › HPN-ICF-IPSEC-MONITOR-V2-MIB › hpnicfIPsecTrafficRemAddr1V2
hpnicfIPsecTrafficRemAddr1V2
Module: HPN-ICF-IPSEC-MONITOR-V2-MIB
OID (symbolic): HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr1V2
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.12
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-only
Description: The first IP address specification of the remote peer's traffic.
If the remote traffic type is single IP address, this is the IP address.
If the remote traffic type is IP subnet, this is the subnet address.
If the remote traffic type is IP address range, this is the beginning IP address of the range.
What is hpnicfIPsecTrafficRemAddr1V2?
Reports the first address value defining the remote traffic selector for this tunnel, meaning either the single IP address, the subnet address, or the beginning of an address range depending on the traffic type. Administrators use this to determine which remote hosts or subnet this tunnel is protecting traffic to.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.12 snmpwalk -v2c -c public <target> HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr1V2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.12.1 snmpget -v2c -c public <target> HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr1V2.1
Start monitoring HPE/H3C Comware VPN gateway/firewall (IPsec tunnel stats, v2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr1V2 OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware VPN gateway/firewall (IPsec tunnel stats, v2) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.126 | hpnicfIPsecMonitorV2 | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1 | hpnicfIPsecObjectsV2 | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5 | hpnicfIPsecTrafficV2Table | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1 | hpnicfIPsecTrafficV2Entry | HPN-ICF-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.12 | hpnicfIPsecTrafficRemAddr1V2 | HPN-ICF-IPSEC-MONITOR-V2-MIB |