All MIBs › HPN-ICF-IKE-MONITOR-MIB › hpnicfIKETunRemoteValue1
hpnicfIKETunRemoteValue1
Module: HPN-ICF-IKE-MONITOR-MIB
OID (symbolic): HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteValue1
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.7
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The value of the remote peer identity.
If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the remote peer.
If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address.
If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range.
If the remote peer type is fqdn/userFqdn, this is the host name used to identify the remote peer.
If the remote peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA.
If the remote peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA.
If the remote peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations.
What is hpnicfIKETunRemoteValue1?
Reports the remote peer's identity value in the format dictated by hpnicfIKETunRemoteType - e.g. the peer's IP address, hostname, or the start of an address range - the primary field for seeing who is on the other end of this tunnel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.7 snmpwalk -v2c -c public <target> HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteValue1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.7.1 snmpget -v2c -c public <target> HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteValue1.1
Start monitoring HP/H3C Comware VPN gateway router (IKE tunnel statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteValue1 OID value, configure state conditions and alerts, and monitor any HP/H3C Comware VPN gateway router (IKE tunnel statistics) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.30 | hpnicfIKEMonitor | HPN-ICF-IKE-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.30.1 | hpnicfIKEObjects | HPN-ICF-IKE-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1 | hpnicfIKETunnelTable | HPN-ICF-IKE-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1 | hpnicfIKETunnelEntry | HPN-ICF-IKE-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.7 | hpnicfIKETunRemoteValue1 | HPN-ICF-IKE-MONITOR-MIB |