All MIBs › HPN-ICF-IKE-MONITOR-MIB › hpnicfIKETunLocalValue1
hpnicfIKETunLocalValue1
Module: HPN-ICF-IKE-MONITOR-MIB
OID (symbolic): HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalValue1
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The value of the local peer identity.
If the local peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the local peer.
If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address.
If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range.
If the local peer type is fqdn/userFqdn, this is the host name used to identify the local peer.
If the local peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA.
If the local peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA.
If the local peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations.
What is hpnicfIKETunLocalValue1?
Reports the local peer's identity value in the format dictated by hpnicfIKETunLocalType - e.g. an IP address if the type is ipv4Addr, or a hostname if the type is fqdn - the primary field an admin reads to see how this end identified itself in the negotiation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.3 snmpwalk -v2c -c public <target> HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalValue1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.3.1 snmpget -v2c -c public <target> HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalValue1.1
Start monitoring HP/H3C Comware VPN gateway router (IKE tunnel statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalValue1 OID value, configure state conditions and alerts, and monitor any HP/H3C Comware VPN gateway router (IKE tunnel statistics) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.30 | hpnicfIKEMonitor | HPN-ICF-IKE-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.30.1 | hpnicfIKEObjects | HPN-ICF-IKE-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1 | hpnicfIKETunnelTable | HPN-ICF-IKE-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1 | hpnicfIKETunnelEntry | HPN-ICF-IKE-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.3 | hpnicfIKETunLocalValue1 | HPN-ICF-IKE-MONITOR-MIB |