HPN-ICF-EPON-DEVICE-MIB :: hpnicfEponDeviceObjectFecEnabled

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-EPON-DEVICE-MIBhpnicfEponDeviceObjectFecEnabled

hpnicfEponDeviceObjectFecEnabled

Module: HPN-ICF-EPON-DEVICE-MIB

OID (symbolic): HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectFecEnabled

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable defines and provides information whether the EPON device uses FEC as defined in the [802.3ah] clause 65.2 for EPON. When noFECEnabled(1) the device does not support FEC mode When fecTxEnabled(2) the device supports the FEC transmission mode. When fecRxEnabled(3) the device supports the FEC Receive mode. When fecTxRxEnabled(4) the device supports the FEC transmission and receive mode. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.

What is hpnicfEponDeviceObjectFecEnabled?

Controls Forward Error Correction (FEC) mode on the EPON link: noFecEnabled(1) disables it, fecTxEnabled(2)/fecRxEnabled(3) enable it in one direction, and fecTxRxEnabled(4) enables it both ways, per IEEE 802.3ah clause 65.2. An operator enables FEC to improve reliability over longer or noisier PON spans at some cost to overhead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4
snmpwalk -v2c -c public <target> HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectFecEnabled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4.1
snmpget -v2c -c public <target> HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectFecEnabled.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4.1 i <value>

Start monitoring HP/H3C Comware EPON OLT and ONU access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectFecEnabled OID value, configure state conditions and alerts, and monitor any HP/H3C Comware EPON OLT and ONU access equipment from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42hpnicfEponHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.42.4hpnicfEponDeviceMIBHPN-ICF-EPON-DEVICE-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.4.1hpnicfEponDeviceObjectMIBHPN-ICF-EPON-DEVICE-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1hpnicfEponDeviceObjectsHPN-ICF-EPON-DEVICE-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1hpnicfEponDeviceControlObjectsHPN-ICF-EPON-DEVICE-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1hpnicfEponDeviceControlTableHPN-ICF-EPON-DEVICE-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1hpnicfEponDeviceControlEntryHPN-ICF-EPON-DEVICE-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4hpnicfEponDeviceObjectFecEnabledHPN-ICF-EPON-DEVICE-MIB