All MIBs › HPN-ICF-DOT11-CFG-MIB › hpnicfDot11SrvPortSecurityMode
hpnicfDot11SrvPortSecurityMode
Module: HPN-ICF-DOT11-CFG-MIB
OID (symbolic): HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPortSecurityMode
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines the security modes of the WLAN port.
noRestrictions The default value, no any security mode is set.
userLoginSecureExt Access to the port is denied until the port client is authorized (by 802.1X).
psk Access to the port is denied until the port client is authorized (by 802.1X key negotiation).
macAddressAndPsk The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication.
userLoginSecureExtOrPsk This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice.
ext Access to the port is denied until the port client is authenticated (by ext).
What is hpnicfDot11SrvPortSecurityMode?
Selects the port security mode for the WLAN service port: 'noRestrictions' (default, no security), 'userLoginSecureExt' (802.1X authorization required), 'psk' (802.1X key negotiation required), 'macAddressAndPsk' (MAC address checked first, then PSK), 'userLoginSecureExtOrPsk' (either method accepted), or 'ext' (an external authentication method).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.2 snmpwalk -v2c -c public <target> HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPortSecurityMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.2.1 snmpget -v2c -c public <target> HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPortSecurityMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfDot11SrvPortSecurityMode.1
Start monitoring H3C/HPE Networking (ICF-based) wireless controller (WLAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPortSecurityMode OID value, configure state conditions and alerts, and monitor any H3C/HPE Networking (ICF-based) wireless controller (WLAN config) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75 | hpnicfDot11 | HPN-ICF-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4 | hpnicfDot11CFG | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2 | hpnicfDot11PolicyConfigGroup | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5 | hpnicfDot11SrvPortSecurityTable | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1 | hpnicfDot11SrvPortSecurityEntry | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.2 | hpnicfDot11SrvPortSecurityMode | HPN-ICF-DOT11-CFG-MIB |