HPN-ICF-DOT11-CFG-MIB :: hpnicfDot11RCRadioRateCM

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › HPN-ICF-DOT11-CFG-MIB › hpnicfDot11RCRadioRateCM

hpnicfDot11RCRadioRateCM

Module: HPN-ICF-DOT11-CFG-MIB

OID (symbolic): HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRateCM

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format of each value can be MCS X. The data transmit rates between AP and client should be one of the configured rates. (Note: For 802.11n radios, the first value is mandatory rate, and the second value is supported rate. If more than two rate values are configured, the configuration will not take effect. If only one rate value is configured, the mandatory rate will be set to the default value.)

What is hpnicfDot11RCRadioRateCM?

Sets the allowed data transmission rates for this radio as a comma-separated list, the compact 'CM' counterpart to hpnicfDot11RCRadioRate with the same mandatory/supported-rate rules for 802.11n radios.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17
snmpwalk -v2c -c public <target> HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRateCM

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17.1
snmpget -v2c -c public <target> HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRateCM.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17.1 s <value>

Start monitoring H3C/HPE Networking (ICF-based) wireless controller (WLAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRateCM OID value, configure state conditions and alerts, and monitor any H3C/HPE Networking (ICF-based) wireless controller (WLAN config) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75hpnicfDot11HPN-ICF-DOT11-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.75.4hpnicfDot11CFGHPN-ICF-DOT11-CFG-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.4.3hpnicfDot11APConfigGroupHPN-ICF-DOT11-CFG-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8hpnicfDot11RadioConfigTableHPN-ICF-DOT11-CFG-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1hpnicfDot11RadioConfigEntryHPN-ICF-DOT11-CFG-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17hpnicfDot11RCRadioRateCMHPN-ICF-DOT11-CFG-MIB