All MIBs › HPN-ICF-DOT11-CFG-MIB › hpnicfDot11RCRadioRate
hpnicfDot11RCRadioRate
Module: HPN-ICF-DOT11-CFG-MIB
OID (symbolic): HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRate
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the configured rates. (Note: For 802.11n radios, the first value will be treated as a mandatory rate, and the second value will be treated as a supported rate. If you configure more than two rates, the configuration cannot take effect. If you configure only one rate, it is considered as the mandatory rate by default.)
What is hpnicfDot11RCRadioRate?
Sets the allowed data transmission rates for this radio as a comma-separated list (e.g. '1,2,5.5' for legacy rates, or 'MCS X' for 802.11n); traffic between AP and station must use one of the configured rates. For 802.11n radios, only the first two configured values are used (mandatory rate, then supported rate) - configuring more than two rates has no effect, and a single value becomes the mandatory rate by default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11 snmpwalk -v2c -c public <target> HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11.1 snmpget -v2c -c public <target> HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11.1 s <value>
Start monitoring H3C/HPE Networking (ICF-based) wireless controller (WLAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRate OID value, configure state conditions and alerts, and monitor any H3C/HPE Networking (ICF-based) wireless controller (WLAN config) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75 | hpnicfDot11 | HPN-ICF-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4 | hpnicfDot11CFG | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3 | hpnicfDot11APConfigGroup | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8 | hpnicfDot11RadioConfigTable | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1 | hpnicfDot11RadioConfigEntry | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11 | hpnicfDot11RCRadioRate | HPN-ICF-DOT11-CFG-MIB |