All MIBs › HPN-ICF-DOT11-CFG-MIB › hpnicfDot11APL2IsolateEnable
hpnicfDot11APL2IsolateEnable
Module: HPN-ICF-DOT11-CFG-MIB
OID (symbolic): HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APL2IsolateEnable
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.16
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Represents enable the layer2 isolation or not. 'true' : The layer2 isolation functionality is enabled. 'false': The layer2 isolation functionality is disabled.
What is hpnicfDot11APL2IsolateEnable?
Turns Layer 2 isolation on or off for wireless clients of the AP. When enabled ('true'), associated stations cannot directly communicate with each other at Layer 2, which is useful for guest or hotspot deployments; default is 'false'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.16 snmpwalk -v2c -c public <target> HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APL2IsolateEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.16.1 snmpget -v2c -c public <target> HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APL2IsolateEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.16.1 s <value>
Start monitoring H3C/HPE Networking (ICF-based) wireless controller (WLAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APL2IsolateEnable OID value, configure state conditions and alerts, and monitor any H3C/HPE Networking (ICF-based) wireless controller (WLAN config) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75 | hpnicfDot11 | HPN-ICF-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4 | hpnicfDot11CFG | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1 | hpnicfDot11GlobeConfigGroup | HPN-ICF-DOT11-CFG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.16 | hpnicfDot11APL2IsolateEnable | HPN-ICF-DOT11-CFG-MIB |