All MIBs › HP-USER-AUTH › hpicfUsrAuthMacAuthClientMoves
hpicfUsrAuthMacAuthClientMoves
Module: HP-USER-AUTH
OID (symbolic): HP-USER-AUTH::hpicfUsrAuthMacAuthClientMoves
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies whether client may roam across ports under web authentication control. Setting this attribute 'enabled'allows authenticated clients to roam to other ports under web authentication control (that also have this attribute set to 'enabled') without requiring a reauthentication.
Setting this attribute 'disabled' disallows authenticated clients from roaming to other ports (regardless of that port's attribute value). The client has to reauthenticate, if it attempts to roam.
What is hpicfUsrAuthMacAuthClientMoves?
Controls whether an already MAC-authenticated client can roam to another port that also allows roaming without reauthenticating; note the source MIB's description text literally says 'web authentication control,' but this object sits in the MAC-auth config table (hpicfUsrAuthMacAuthConfigEntry) and governs MAC-auth roaming -- an apparent copy-paste from its WebAuth sibling. Defaults to disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.2 snmpwalk -v2c -c public <target> HP-USER-AUTH::hpicfUsrAuthMacAuthClientMoves
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.2.1 snmpget -v2c -c public <target> HP-USER-AUTH::hpicfUsrAuthMacAuthClientMoves.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.2.1 i <value>
Start monitoring HP/Aruba networking switch or wireless access point (WebAuth/MacAuth/CLI auth) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-USER-AUTH::hpicfUsrAuthMacAuthClientMoves OID value, configure state conditions and alerts, and monitor any HP/Aruba networking switch or wireless access point (WebAuth/MacAuth/CLI auth) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.19 | hpicfUsrAuthMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.19.4 | hpicfUsrAuthMacAuthConfig | HP-USER-AUTH |
| 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1 | hpicfUsrAuthMacAuthConfigTable | HP-USER-AUTH |
| 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1 | hpicfUsrAuthMacAuthConfigEntry | HP-USER-AUTH |
| 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.2 | hpicfUsrAuthMacAuthClientMoves | HP-USER-AUTH |