All MIBs › HP-USER-AUTH › hpicfUsrAuthMacAuthAddrFormat
hpicfUsrAuthMacAuthAddrFormat
Module: HP-USER-AUTH
OID (symbolic): HP-USER-AUTH::hpicfUsrAuthMacAuthAddrFormat
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.19.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: For all ports running with MAC authentication enabled: Specifies the MAC address format to use in the RADIUS access-request, as follows: 'noDelimiter' - Sends MAC address in aabbccddeeff format 'singleDash' - Sends MAC address in aabbcc-ddeeff format 'multiDash' - Sends MAC address in aa-bb-cc-dd-ee-ff format 'multiColon' - Sends MAC address in aa:bb:cc:dd:ee:ff format 'noDelimiterUppercase' - Sends MAC address in AABBCCDDEEFF format 'singleDashUppercase' - Sends MAC address in AABBCC-DDEEFF format 'multiDashUppercase' - Sends MAC address in AA-BB-CC-DD-EE-FF format 'multiColonUppercase' - Sends MAC address in AA:BB:CC:DD:EE:FF format The default value is noDelimiter(1).
What is hpicfUsrAuthMacAuthAddrFormat?
Selects the text format the switch uses to write a client's MAC address into the RADIUS access-request during MAC authentication -- plain (aabbccddeeff), single-dash, multi-dash, or multi-colon, each also available in uppercase. An admin sets this to match whatever format their RADIUS server's user database stores MAC addresses in, since a mismatch here causes otherwise-valid MAC-auth clients to be rejected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.19.1.4 snmpwalk -v2c -c public <target> HP-USER-AUTH::hpicfUsrAuthMacAuthAddrFormat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.19.1.4.1 snmpget -v2c -c public <target> HP-USER-AUTH::hpicfUsrAuthMacAuthAddrFormat.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.19.1.4.1 i <value>
Start monitoring HP/Aruba networking switch or wireless access point (WebAuth/MacAuth/CLI auth) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-USER-AUTH::hpicfUsrAuthMacAuthAddrFormat OID value, configure state conditions and alerts, and monitor any HP/Aruba networking switch or wireless access point (WebAuth/MacAuth/CLI auth) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.19 | hpicfUsrAuthMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.19.1 | hpicfUsrAuthSystem | HP-USER-AUTH |
| 1.3.6.1.4.1.11.2.14.11.5.1.19.1.4 | hpicfUsrAuthMacAuthAddrFormat | HP-USER-AUTH |