All MIBs › HP-USER-AUTH › hpicfUsrAuthCliNotifyEnable
hpicfUsrAuthCliNotifyEnable
Module: HP-USER-AUTH
OID (symbolic): HP-USER-AUTH::hpicfUsrAuthCliNotifyEnable
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.19.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The operational status of hpicfUsrAuthCliAuthFail notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requires authentication, such as provided by SNMPv3.
What is hpicfUsrAuthCliNotifyEnable?
Turns the SNMP trap for CLI authentication failures (hpicfUsrAuthCliAuthFail) on or off; it defaults to enabled(1). An admin might disable it on a busy switch to cut trap noise, but changing the value requires an authenticated write such as SNMPv3.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.19.1.5 snmpwalk -v2c -c public <target> HP-USER-AUTH::hpicfUsrAuthCliNotifyEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.19.1.5.1 snmpget -v2c -c public <target> HP-USER-AUTH::hpicfUsrAuthCliNotifyEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.19.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpicfUsrAuthCliNotifyEnable.1
Start monitoring HP/Aruba networking switch or wireless access point (WebAuth/MacAuth/CLI auth) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-USER-AUTH::hpicfUsrAuthCliNotifyEnable OID value, configure state conditions and alerts, and monitor any HP/Aruba networking switch or wireless access point (WebAuth/MacAuth/CLI auth) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.19 | hpicfUsrAuthMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.19.1 | hpicfUsrAuthSystem | HP-USER-AUTH |
| 1.3.6.1.4.1.11.2.14.11.5.1.19.1.5 | hpicfUsrAuthCliNotifyEnable | HP-USER-AUTH |