All MIBs › HP-SN-IP-VRRP-MIB › snVrrpVirRtrTrackVifPortList
snVrrpVirRtrTrackVifPortList
Module: HP-SN-IP-VRRP-MIB
OID (symbolic): HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifPortList
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP virtual port track membership.
What is snVrrpVirRtrTrackVifPortList?
This encodes, as a list of ifIndex values, which virtual ports this virtual router tracks to dynamically adjust its priority, replacing the older snVrrpVirRtrTrackVifMask, in this deprecated legacy table. An admin configuring virtual-interface tracking today has no direct successor object for this specific one in snVrrpVirRtr2Table, since that table's design note says virtual interface track port list support was dropped.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28 snmpwalk -v2c -c public <target> HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifPortList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28.1 snmpget -v2c -c public <target> HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifPortList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28.1 s <value>
Start monitoring HP ServerNet (Foundry-heritage) routing switch (VRRP failover) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifPortList OID value, configure state conditions and alerts, and monitor any HP ServerNet (Foundry-heritage) routing switch (VRRP failover) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12 | snVrrp | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3 | snVrrpVirRtr | HP-SN-IP-VRRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1 | snVrrpVirRtrTable | HP-SN-IP-VRRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1 | snVrrpVirRtrEntry | HP-SN-IP-VRRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28 | snVrrpVirRtrTrackVifPortList | HP-SN-IP-VRRP-MIB |