All MIBs › HP-SN-IP-VRRP-MIB › snVrrpVirRtrTrackPortMask
snVrrpVirRtrTrackPortMask
Module: HP-SN-IP-VRRP-MIB
OID (symbolic): HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortMask
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)
What is snVrrpVirRtrTrackPortMask?
This bitmask identifies which physical ports' link state this virtual router tracks to dynamically adjust its priority, in this deprecated legacy table; it was itself obsoleted after release 07100 in favor of snVrrpVirRtrTrackPortList. An admin configuring port tracking today should use snVrrpVirRtrTrackPortList or, on the ifIndex-based table, snVrrpVirRtr2TrackPortList instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13 snmpwalk -v2c -c public <target> HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13.1 snmpget -v2c -c public <target> HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13.1 s <value>
Start monitoring HP ServerNet (Foundry-heritage) routing switch (VRRP failover) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortMask OID value, configure state conditions and alerts, and monitor any HP ServerNet (Foundry-heritage) routing switch (VRRP failover) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12 | snVrrp | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3 | snVrrpVirRtr | HP-SN-IP-VRRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1 | snVrrpVirRtrTable | HP-SN-IP-VRRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1 | snVrrpVirRtrEntry | HP-SN-IP-VRRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13 | snVrrpVirRtrTrackPortMask | HP-SN-IP-VRRP-MIB |