All MIBs › HP-SN-IP-VRRP-MIB › snVrrpVirRtrTrackPortList
snVrrpVirRtrTrackPortList
Module: HP-SN-IP-VRRP-MIB
OID (symbolic): HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortList
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP physical track port membership.
What is snVrrpVirRtrTrackPortList?
This encodes, as a list of ifIndex values, which physical and virtual ports this virtual router tracks to dynamically adjust its priority, replacing the older snVrrpVirRtrTrackPortMask, in this deprecated legacy table. An admin configuring port tracking on the current platform should use snVrrpVirRtr2TrackPortList instead, since this whole table is deprecated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27 snmpwalk -v2c -c public <target> HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27.1 snmpget -v2c -c public <target> HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27.1 s <value>
Start monitoring HP ServerNet (Foundry-heritage) routing switch (VRRP failover) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortList OID value, configure state conditions and alerts, and monitor any HP ServerNet (Foundry-heritage) routing switch (VRRP failover) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12 | snVrrp | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3 | snVrrpVirRtr | HP-SN-IP-VRRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1 | snVrrpVirRtrTable | HP-SN-IP-VRRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1 | snVrrpVirRtrEntry | HP-SN-IP-VRRP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27 | snVrrpVirRtrTrackPortList | HP-SN-IP-VRRP-MIB |