All MIBs › HP-SN-IGMP-MIB › snIgmpQueryInterval
snIgmpQueryInterval
Module: HP-SN-IGMP-MIB
OID (symbolic): HP-SN-IGMP-MIB::snIgmpQueryInterval
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the time interval at which this entity sends out IGMP host query packets. For a router, snDvmrpEnable must have been set to 'enabled' before this object is writen. For a switch, snSwGroupIpMcastMode must have been set to 'enabled' and snSwIpMcastQuerierMode must have been set to 'querier' before this object is writen.
What is snIgmpQueryInterval?
This read-write value (1-3600 seconds, default 60) sets how often this device sends IGMP host query packets, and requires multicast/querier mode to already be enabled on the router or switch before it can be written. Admins tune it to control how frequently the device probes for active multicast group membership on its interfaces. For example, lowering it from the default 60 seconds to 30 makes the device detect departed multicast receivers more quickly at the cost of more query traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.1 snmpwalk -v2c -c public <target> HP-SN-IGMP-MIB::snIgmpQueryInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.1.1 snmpget -v2c -c public <target> HP-SN-IGMP-MIB::snIgmpQueryInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.1.1 i <value>
Start monitoring HP SN-series (Foundry-heritage) routing switch (IGMP snooping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-IGMP-MIB::snIgmpQueryInterval OID value, configure state conditions and alerts, and monitor any HP SN-series (Foundry-heritage) routing switch (IGMP snooping) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6 | snIgmp | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1 | snIgmpMIBObjects | HP-SN-IGMP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.1 | snIgmpQueryInterval | HP-SN-IGMP-MIB |