All MIBs › HP-SN-BGP4-GROUP-MIB › snBgp4AddrFilterRowStatus
snBgp4AddrFilterRowStatus
Module: HP-SN-BGP4-GROUP-MIB
OID (symbolic): HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterRowStatus
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row
If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
What is snBgp4AddrFilterRowStatus?
Controls the lifecycle of this BGP address filter table row via SNMP: writing create(4) adds a new filter entry, modify(5) changes an existing one, delete(3) removes it, and invalid(1) disables it without deleting it. Used to manage filter rows remotely instead of via console configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7 snmpwalk -v2c -c public <target> HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7.1 snmpget -v2c -c public <target> HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7.1 i <value>
Start monitoring HP ProCurve Routing Switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterRowStatus OID value, configure state conditions and alerts, and monitor any HP ProCurve Routing Switches from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | router | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11 | snBgp4 | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2 | snBgp4AddrFilter | HP-SN-BGP4-GROUP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1 | snBgp4AddrFilterTable | HP-SN-BGP4-GROUP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1 | snBgp4AddrFilterEntry | HP-SN-BGP4-GROUP-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7 | snBgp4AddrFilterRowStatus | HP-SN-BGP4-GROUP-MIB |