All MIBs › HP-SN-AGENT-MIB › snStackSecSwitchCfgCmd
snStackSecSwitchCfgCmd
Module: HP-SN-AGENT-MIB
OID (symbolic): HP-SN-AGENT-MIB::snStackSecSwitchCfgCmd
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: snStackSecSwitchSlotId must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically. auto(2)...........auto-configuration command sent. manual(3).........manual-configuration command sent. if manual-mode is used, snStackSecSwitchIpAddr and snStackSecSwitchSubnetMask must be first set before this command is sent. The return result of the above commands are either normal(0)...........normal condition. invalid(1)..........invalid result.
What is snStackSecSwitchCfgCmd?
An action object that sends a configuration command from the primary switch to this secondary switch, either auto (automatic) or manual; the target slot must be set first, and for manual mode the secondary's IP address and subnet mask must also be set beforehand, with the result reported as normal or invalid. An admin uses this to (re)configure an individual stack member rather than the whole group at once.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.10 snmpwalk -v2c -c public <target> HP-SN-AGENT-MIB::snStackSecSwitchCfgCmd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.10.1 snmpget -v2c -c public <target> HP-SN-AGENT-MIB::snStackSecSwitchCfgCmd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.10.1 i <value>
Start monitoring HP/Foundry-heritage chassis-based network switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-AGENT-MIB::snStackSecSwitchCfgCmd OID value, configure state conditions and alerts, and monitor any HP/Foundry-heritage chassis-based network switch from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1 | switch | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5 | snStack | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2 | snStackSecSwitchInfo | HP-SN-AGENT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1 | snStackSecSwitchTable | HP-SN-AGENT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1 | snStackSecSwitchEntry | HP-SN-AGENT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.10 | snStackSecSwitchCfgCmd | HP-SN-AGENT-MIB |