HP-SN-AGENT-MIB :: snChasMediaLeds

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HP-SN-AGENT-MIB › snChasMediaLeds

snChasMediaLeds

Module: HP-SN-AGENT-MIB

OID (symbolic): HP-SN-AGENT-MIB::snChasMediaLeds

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: A bit array that contains the value of the
        front panel media LEDs. This is a packed bit string; 
        each LED is encoded into 1 bit for each switch port.  
        The maximum number of ports in one chassis is 24 
        that means 24 Ports Media LEDs.  The expansion port 
        number always begins from the last main port number. 
        The following shows the meaning of each bit for each 
        switch port:

        bit value  meaning   
        ---------  -------
  0        half duplex
  1        full duplex

        The bitmap of LEDs are as following: 
                 (Port1)            (Port4)                    (Port8)
Bit      (Bit0)             (Bit3)                      (Bit7)
        Byte 1:  LED1   LED2   LED3  LED4   LED5   LED6   LED7   LED8    
        Byte 2:  LED9   LED10  LED11 LED12  LED13  LED14  LED15  LED16     
        Byte 3:  LED17  LED18  LED19 LED20  LED21  LED22  LED23  LED24                    
---------

What is snChasMediaLeds?

A bitmap reporting the front-panel media/duplex LED state for up to 24 switch ports, one bit per port (0=half duplex, 1=full duplex), packed sequentially across up to three bytes. An admin uses this to remotely check each port's duplex mode as shown by its front-panel LED.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.11
snmpwalk -v2c -c public <target> HP-SN-AGENT-MIB::snChasMediaLeds

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.11.1
snmpget -v2c -c public <target> HP-SN-AGENT-MIB::snChasMediaLeds.1

Start monitoring HP/Foundry-heritage chassis-based network switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-AGENT-MIB::snChasMediaLeds OID value, configure state conditions and alerts, and monitor any HP/Foundry-heritage chassis-based network switch from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.7netElementHP-BASE-MIB
1.3.6.1.4.1.11.2.3.7.11hpEtherSwitchHP-BASE-MIB
1.3.6.1.4.1.11.2.3.7.11.12hpSwitchCoreHP-SN-ROOT-MIB
1.3.6.1.4.1.11.2.3.7.11.12.1switchHP-SN-ROOT-MIB
1.3.6.1.4.1.11.2.3.7.11.12.1.1snChassisHP-SN-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.7.11.12.1.1.1snChasGenHP-SN-AGENT-MIB
1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.11snChasMediaLedsHP-SN-AGENT-MIB