All MIBs › HP-SN-AGENT-MIB › snAgImgLoad
snAgImgLoad
Module: HP-SN-AGENT-MIB
OID (symbolic): HP-SN-AGENT-MIB::snAgImgLoad
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) and tftpWrongFileType(23). loading(18) .. operation is in process.
The following values are used for set : uploadPrimary(19)..upload the Primary image from flash to tftp server. downloadPrimary(20)..download the Primary image from tftp server to flash. uploadSecondary(21)..upload the Secondary image from flash to tftp server. downloadSecondary(22)..download the Secondary image from tftp server to flash.
The image filename is defined in snAgImgFname. The tftp server address is defined in snAgTftpServerIp. Atomic set of snAgImgLoad, snAgImgFname and snAgTftpServerIp is required to allow down/up load to happen. And the write request will be rejected during loading until error or normal.
What is snAgImgLoad?
An action object that drives firmware image transfers between the agent and a TFTP server: setting uploadPrimary/downloadPrimary or uploadSecondary/downloadSecondary starts the corresponding transfer using the filename in snAgImgFname and server in snAgAgTftpServerIp, while reading it returns normal, an error code, or loading while a transfer is in progress. An admin must set the image name and TFTP server address as part of the same operation for the load to succeed, and further writes are rejected until the current operation completes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.7 snmpwalk -v2c -c public <target> HP-SN-AGENT-MIB::snAgImgLoad
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.7.1 snmpget -v2c -c public <target> HP-SN-AGENT-MIB::snAgImgLoad.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.7.1 i <value>
Start monitoring HP/Foundry-heritage chassis-based network switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-SN-AGENT-MIB::snAgImgLoad OID value, configure state conditions and alerts, and monitor any HP/Foundry-heritage chassis-based network switch from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-BASE-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12 | hpSwitchCore | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1 | switch | HP-SN-ROOT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2 | snAgentSys | HP-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1 | snAgentGbl | HP-SN-AGENT-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.7 | snAgImgLoad | HP-SN-AGENT-MIB |