All MIBs › HP-ICF-USER-PROFILE-MIB › hpicfUsrProfileCapabilityByUserMap
hpicfUsrProfileCapabilityByUserMap
Module: HP-ICF-USER-PROFILE-MIB
OID (symbolic): HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCapabilityByUserMap
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.12.1.0.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: A string of octets containing one bit per access profile primitive as follows: bit 0 - PVID/native/untagged ingress VLAN bit 1 - Tagged Egress VLAN bit 2 - Ingress VLAN Filter bit 3 - Priority Regeneration bit 4 - Max. Ingress Bandwidth bit 5 - Max. Egress Bandwidth bit 6 - Filter List bit 7 - Hitcount Support bit 8 - through 64 - reserved
When a bit is set to one, it indicates that device supports the selected access profile primitive on a per 'hpicfUsrProfileUserMacAddr' basis. The consequence is that the device can enforce unique per user access profile primitives for each user on a given port ('hpicfUsrProfileUserPortNumber').
What is hpicfUsrProfileCapabilityByUserMap?
A read-only 8-octet bitmap, mirroring hpicfUsrProfileCapabilityByPortMap's bit layout, where each set bit indicates the device can enforce that access-profile feature uniquely per user (by MAC address) rather than only per port. Admins check this to confirm the switch actually supports assigning different per-user settings, e.g. distinct bandwidth caps, to multiple users sharing the same port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.12.1.0.2 snmpwalk -v2c -c public <target> HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCapabilityByUserMap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.12.1.0.2.1 snmpget -v2c -c public <target> HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCapabilityByUserMap.1
Start monitoring HP ProCurve switch (802.1X user access-profile assignment) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCapabilityByUserMap OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (802.1X user access-profile assignment) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.12 | hpicfCommonSecurity | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.12.1 | hpicfUsrProfileMIB | HP-ICF-USER-PROFILE-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.0 | hpicfUsrProfileCapability | HP-ICF-USER-PROFILE-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.0.2 | hpicfUsrProfileCapabilityByUserMap | HP-ICF-USER-PROFILE-MIB |