All MIBs › HP-ICF-UDP-FORWARD › hpicfUdpFwdDhcpRelayOption82RemoteId
hpicfUdpFwdDhcpRelayOption82RemoteId
Module: HP-ICF-UDP-FORWARD
OID (symbolic): HP-ICF-UDP-FORWARD::hpicfUdpFwdDhcpRelayOption82RemoteId
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.23.1.8.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Remote ID sub option that will be filled while forwarding the client request to the server. This mib object can be configured only when hpicfUdpFwdDhcpRelayOption82AdminStatus is in enable state. The default value for this mib object is mac.
mac --- the switch MAC address is filled as remote id sub option. ip --- IP address of the VLAN on which the client request is received is filled as remote id sub option. mgmtvlan --- the management VLAN IP address will be filled for remote id sub option.
What is hpicfUdpFwdDhcpRelayOption82RemoteId?
This read-write integer selects what value the relay agent inserts into the Option 82 Remote ID sub-option, choosing among mac(1), ip(2), or mgmtvlan(3). Per the description, mac uses the switch's own MAC address, ip uses the VLAN interface's IP address where the client request arrived, and mgmtvlan uses the management VLAN's IP address, letting an admin choose how relayed clients are identified upstream. An admin standardizing DHCP relay identification on IP addresses instead of MAC addresses would set this to ip(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.23.1.8.4 snmpwalk -v2c -c public <target> HP-ICF-UDP-FORWARD::hpicfUdpFwdDhcpRelayOption82RemoteId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.23.1.8.4.1 snmpget -v2c -c public <target> HP-ICF-UDP-FORWARD::hpicfUdpFwdDhcpRelayOption82RemoteId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.23.1.8.4.1 i <value>
Start monitoring HP ProCurve/Aruba switch (UDP broadcast/DHCP relay forwarding) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-UDP-FORWARD::hpicfUdpFwdDhcpRelayOption82RemoteId OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (UDP broadcast/DHCP relay forwarding) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.23 | hpicfUdpFwd | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.23.1 | hpicfUdpFwdObjects | HP-ICF-UDP-FORWARD |
| 1.3.6.1.4.1.11.2.14.11.5.1.23.1.8 | hpicfUdpFwdDhcpRelayOption82Objects | HP-ICF-UDP-FORWARD |
| 1.3.6.1.4.1.11.2.14.11.5.1.23.1.8.4 | hpicfUdpFwdDhcpRelayOption82RemoteId | HP-ICF-UDP-FORWARD |