All MIBs › HP-ICF-TRANSCEIVER-MIB › hpicfXcvrMdiPairDCableStatus
hpicfXcvrMdiPairDCableStatus
Module: HP-ICF-TRANSCEIVER-MIB
OID (symbolic): HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairDCableStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.57
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the cable diagnostics test status on the cable pair.
Normal = No cable fault detected. Open = Lack of continuity between ends. Short = Short detected. Impedance Mismatch = - Cable pair is not connected properly or - Cable pair is damaged or - Connector is faulty. Failed = TDR test failed on cable pair. Unspecified : This object is unavailable or not reported.
As reported through cable diagnostics.
The value of this object is valid when the value of the hpicfXcvrDiagnostics object is VCT or other.
What is hpicfXcvrMdiPairDCableStatus?
Cable diagnostics result for copper pair D: normal(0) means no fault, open(2)/short(1) indicate a break or short, impedanceMismatch(4) suggests a bad connector or damaged cable, and failed(3) means the TDR test itself failed. Only valid when hpicfXcvrDiagnostics indicates VCT or other cable-diagnostics support.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.57 snmpwalk -v2c -c public <target> HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairDCableStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.57.1 snmpget -v2c -c public <target> HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairDCableStatus.1
Start monitoring HP ProCurve switch (optical/copper transceiver DOM diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairDCableStatus OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (optical/copper transceiver DOM diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.82 | hpicfTransceiverMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.82.1 | hpicfXcvrObjects | HP-ICF-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.82.1.1 | hpicfXcvrInfo | HP-ICF-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1 | hpicfXcvrInfoTable | HP-ICF-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1 | hpicfXcvrInfoEntry | HP-ICF-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.57 | hpicfXcvrMdiPairDCableStatus | HP-ICF-TRANSCEIVER-MIB |