All MIBs › HP-ICF-RIPNG-MIB › hpicfRipngGarbageCollectTime
hpicfRipngGarbageCollectTime
Module: HP-ICF-RIPNG-MIB
OID (symbolic): HP-ICF-RIPNG-MIB::hpicfRipngGarbageCollectTime
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The garbage-collect timer defines the time interval when the metric of a route is 16 to the time when it is deleted from the routing table.
What is hpicfRipngGarbageCollectTime?
Seconds (default 120) a RIPng route stays in the table with metric 16 (unreachable) before being deleted entirely — this delay lets the unreachable route continue being advertised briefly so neighbors learn of its failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.8 snmpwalk -v2c -c public <target> HP-ICF-RIPNG-MIB::hpicfRipngGarbageCollectTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.8.1 snmpget -v2c -c public <target> HP-ICF-RIPNG-MIB::hpicfRipngGarbageCollectTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.8.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpicfRipngGarbageCollectTime.1
Start monitoring HP ProCurve Layer 3 switch/router (RIPng/IPv6) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RIPNG-MIB::hpicfRipngGarbageCollectTime OID value, configure state conditions and alerts, and monitor any HP ProCurve Layer 3 switch/router (RIPng/IPv6) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.113 | hpicfRipng | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.113.1 | hpicfRipngObjects | HP-ICF-RIPNG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.113.1.1 | hpicfRipngBaseScalars | HP-ICF-RIPNG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.8 | hpicfRipngGarbageCollectTime | HP-ICF-RIPNG-MIB |