All MIBs › HP-ICF-PROVIDER-BRIDGE › hpicfProviderBridgePortType
hpicfProviderBridgePortType
Module: HP-ICF-PROVIDER-BRIDGE
OID (symbolic): HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgePortType
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The type of an externally accessible port on a Provider Bridge. A customer-edge port is a C-VLAN component Port on a Provider Edge Bridge that is connected to customer owned equipment and receives and transmits frames for a single customer. Designating a port as a Customer Edge Port implies Provider Edge Bridge functionality and, specifically, the existence of a C-VLAN component associated with that port. This C-VLAN component is uniquely identified within the Bridge by the port number of the associated Customer Edge Port. A customer-network port is an S-VLAN component Port on a Provider Bridge or within a Provider Edge Bridge that receives and transmits frame for a single customer. A provider-network port is an S-VLAN component Port on a Provider Bridge that can transmit and receive frames for multiple customers.
What is hpicfProviderBridgePortType?
This setting classifies the role a given port plays in the provider-bridging topology: a customer-edge port connects to a single customer's equipment and implies a dedicated C-VLAN component, a customer-network port carries a single customer's traffic as an S-VLAN component, and a provider-network port carries traffic for multiple customers between provider bridges. Administrators configure this per port according to IEEE 802.1ad terminology so the switch handles tagging and forwarding correctly at each network boundary. For example, a port connecting directly to a customer's router would be set to customer-edge(1), while a trunk port linking two provider-network switches would be set to provider-network(3).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1.1 snmpwalk -v2c -c public <target> HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgePortType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1.1.1 snmpget -v2c -c public <target> HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgePortType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1.1.1 i <value>
Start monitoring HP ProCurve switch (802.1ad Provider Bridge/Q-in-Q) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgePortType OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (802.1ad Provider Bridge/Q-in-Q) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.40 | hpicfProviderBridge | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.40.1 | hpicfProviderBridgeObjects | HP-ICF-PROVIDER-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1 | hpicfProviderBridgeBase | HP-ICF-PROVIDER-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4 | hpicfProviderBridgePortTable | HP-ICF-PROVIDER-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1 | hpicfProviderBridgePortEntry | HP-ICF-PROVIDER-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1.1 | hpicfProviderBridgePortType | HP-ICF-PROVIDER-BRIDGE |